Attaching The Manual Cutter Unit - Epson Stylus Pro 7450 User Manual

Attaching the Manual Cutter Unit

To attach the manual cutter unit, follow the steps below.
Note:
A manual cutter unit has either two or three holes on each side. The
illustration used here is a manual cutter unit with three holes. The
instructions are the same, except as noted.
1. Make sure that the printer is turned off.
2. Using the screwdriver, loosen the four screws (silver ones) on
the platen and then remove them.
Note:
Do not loosen the black screws.
Maintenance and Transportation
266