CUSTOM PAPER
This menu contains the following items. To make the paper
setting, see "Making the paper settings" on page 188.
PAPER NUMBER
When you select STANDARD, the printer determines the paper
thickness automatically. You can also select No. X (X can be any
number between 1 to 10) to register or recall the following settings
you have made.
❏ Platen gap
❏ Thickness pattern
❏ Thickness number
❏ Cut method
❏ Paper feed adjustment
❏ Drying time
❏ Paper suction
❏ MicroWeave adjustment
Note:
If you select STANDARD, the printer prints data according to the driver
settings. If you select No. X, the control panel settings override the driver
settings.
PLATEN GAP
You can adjust the distance between the print head and paper.
Normally, leave this set to STANDARD. If you find that printed
images are smeared, select WIDE. Select NARROW for printing on thin
paper, or WIDER for printing on thick paper.
The Control Panel
172