Epson Stylus Pro 7450 User Manual page 292

LEVER RELEASED
LOAD PAPER
LEVER RELEASED
LOWER THE PAPER
SET LEVER
INK CARTRIDGE
INSTALL INK
CARTRIDGE
PAPER JAM
REMOVE PAPER
NO MAINTENANCE
TANK
INSTALL THE LEFT
SIDE
MAINTENANCE
TANK
NO MAINTENANCE
TANK
INSTALL THE RIGHT
SIDE
MAINTENANCE
TANK
NO MAINTENANCE
TANK
INSTALL THE
MAINTENANCE
TANK
F/W INSTALL ERROR
UPDATE FAILED
RESTART THE
PRINTER
The paper is not loaded.
The paper lever is in the
released position.
The ink lever is raised, but
no ink cartridge is
installed.
Paper is jammed in the
printer.
The left side
maintenance tank is not
set in the printer.
The right side
maintenance tank is not
set in the printer.
The maintenance tank is
not set in the printer.
The printer fails to
update the firmware.
Load the paper.
Move the paper lever
to the secured position.
Install the ink cartridge,
and then lower the ink
lever.
Release the paper lever
first, and then remove
the jammed paper.
Turn the printer off,
leave it for a while, and
then turn it on again.
See "Clearing paper
jams" on page 312.
Install the left side
maintenance tank.
Install the right side
maintenance tank.
Install the maintenance
tank.
Restart the printer, and
then update the
firmware again.
Problem Solver
292