Epson Stylus Pro 7450 User Manual page 186

Aligning the print head manually
If you are not satisfied with the result of the automatic head
alignment, you can perform the head alignment manually. To
perform the head alignment manually, follow the steps below.
1. Press the Menu r button to enter Menu mode.
2. Press the Paper Feed d button or Paper Feed u button to
display HEAD ALIGNMENT, and then press the Menu r button.
3. When PAPER THICKNESS appears, press the Menu r button.
4. Press the Paper Feed d button or Paper Feed u button to
select STANDARD or a paper thickness value between 0.1 mm
and 1.5 mm. When the paper thickness value is 0.2 mm or
1.2 mm, select STANDARD; otherwise, select the actual paper
thickness value.
5. Press the Enter
6. Press the Paper Source l button, then press the Paper Feed
d button.
7. When ALIGNMENT appears on the lower row on the LCD panel,
press the Menu r button.
8. Select MANUAL and press the Menu r button. Then, press the
Paper Feed d button or Paper Feed u button to select BI-D
2-COLOR.
9. Press the Enter
Head alignment pattern examples:
button to register your value.
button, and the printer starts printing.
The Control Panel
186