Loading roll paper onto the take-up reel core
Warning:
w
❏ Turn off the Auto Take-up Reel Unit before loading paper. If
❏ Make sure the take-up reel unit is installed properly and
Before you load roll paper onto the take-up reel core, check the
following:
❏ Make sure that the leading edge of the roll paper is straight.
❏ Be sure to remove the center shaft from the upper basket
hooks and the lower shafts from the holes on the bottom of
the base unit, and put the paper basket under the printer.
the take-up reel unit operates unexpectedly, bodily injury
may occur.
securely. Bodily injury may occur if it falls.
Paper Handling
217