Safety Instructions; Basic Safety Instructions - Silvercrest SL 35 Operating Manual

Safety instructions

Please read the safety instructions carefully before
operating the receiver.
Please follow all warnings and instructions on the
equipment and in the operating manual.

Basic safety instructions

Electrical connection
• Separate the receiver from the power source in case of
operational disruptions. Please note: The receiver will
remain live, even if it is turned off with the mains switch
on the rear side.
• Do not expose the receiver to rain or any kind of
humidity to avoid risk of fire and electric shock.
• Never open the casing. Otherwise, there is a risk of
electric shock.
• Connect the receiver only to a professionally installed
mains socket of 100–240 V~, 50–60 Hz.
• The total power consumption by the antenna
connection of the receiver "LNB IN" must not exceed
300 mA.
• Pull out the mains plug from the socket if the
equipment is not in use for a longer period of time.
Only pull at the mains plug, not at the cable.
• In case of storms pull out the mains plug of the
receiver from the socket.
• In case of a storm, loosen the LNB cable from the
receiver.
6