Table of Contents
Advertisement
Handsfree Calls
Press Speaker, LED lights
Ensure MIC LED is lit
Place internal or outside call
Converse
Press Speaker to disconnect call
Note:
The handset may be used at any time during the conversation. To resume
handsfree operation or to monitor a call, press Speaker (LED lights) and
replace handset.
Group Listening
With a call in progress via the handset/headset:
Press Speaker twice (but do not hang up).
Note 1:
Speaker LED flashes slowly.
Note 2:
Conversation is heard over the speaker and the handset/headset. Only the
handset/headset may be used to respond.
Note 3:
When switching from Handsfree mode to the Group Listening Mode, it is
recommended that the Microphone be turned
once, you turn the on Handsfree mode. The second press turns on Group
Listening. Pressing the Speaker key a third time cancels the Group Listening
mode.
Placing A Call On Hold
System Hold
With a call in progress:
Press Hold
Note 1:
To retrieve a held call, press the flashing Line Key, Call Appearance Key or
Conf key (for internal calls).
Note 2:
Call on System Hold can be retrieved from any digital telephone with the held
line appearance or Call Appearance key.
Note 3:
After a preprogrammed time, the held call will recall to the originating station.
Once in a recall condition, Exclusively Held calls can be retrieved from any
station with the held line appearance or Call Appearance key.
8
When you press Speaker
off.
Exclusive Hold
With a call in progress:
Press Exclusive Hold key
(Code 45)
Hide quick links:
Advertisement
Table of Contents
