Set Relocation; Code Restriction, Dial Block; Account Code Entry - NEC Xen IPK II User Manual

Set Relocation

To exchange two terminals:
Press Speaker
Dial the Extension Data Swap Service code________
(Not assigned at default)
Dial the Extension Data Swap Password ________
(Not assigned at default)
Dial the extension to be swapped with or relocated to
When successfully completed, confirmation tone will be heard and the
display will show completed
Press Speaker twice

Code Restriction, Dial Block

Set/Release
Press Speaker
Dial 600
Dial the 4-digit Dial Block Code (user defined)
TO SET, dial 1
TO RELEASE, dial 0
Note: Confirmation tone is heard.
Press Speaker
Note: At default, Dial Block restriction Class per Extension is denied.

Account Code Entry

With an outside call in progress:
Dial
-OR-
Press your Account Code key (Code
Dial Account Code (16 digits maximum)
Dial
-OR-
Press your Account Code key
Note 1: The outside party will not hear digits being dialled.
Note 2: If Account Codes are hidden, each digit will be displayed as an " ".
50)
19