General Information - NEC Xen IPK II User Manual

General Information

The following should be considered when reviewing this User Guide:
Instructions are provided for the NEC Xen IPK II digital telephones Dterm
Series i.
All operational instructions assume Prime Line Pickup is assigned to
intercom dial tone, Ringing Line Preference is assigned to all telephones, a
Line and Secondary Incoming Extension key has been assigned to all digital
telephones and only a single tenant has been assigned in the system.
All access codes listed are standard; some may vary based on system
assignment. Please consult your authorised NEC Channel Partner for the
access codes applicable to your system.
Access to many features is based on system assignments. Not all features
may be available from your telephone.
Digital telephones are equipped with displays to provide useful call
processing information such as digits dialled, recall indications, feature
confirmation, etc.
Xen IPK II digital telephones also show features accessible by the softkeys.
This document supports main software V1000 series.
LED Indications
Function
Line Keys:
Incoming Call
Held Call Your telephone
Held Call - Other telephone
Call in progress
Your telephone
Other telephone
Hold recall
Large LED:
Incoming calls
(CO/PBX, DIT or ANA)
Incoming intercom, TIE Line or DID Call
Message Waiting
Voicemail Message
Other:
Held Intercom Call
Microphone On
Handset Muted
4
Lamp Status
Rapid Flashing Red
Slow Flashing Green
Slow Flashing Red
Steady Green
Steady Red
Intermittent Flashing Green
Rapid Flashing Green
Rapid Flashing Red
Slow Flashing Green
Slow Flashing Red
Conf LED Flashing Red
Mic LED Steady Red
Mic LED Flashing Red