Call Park - System; Station Busy/No Answer Options - NEC Xen IPK II User Manual

Call Park - System

Set
With a call in progress:
Press the programmed Park
Use paging to announce call
Press Speaker to hang up
-OR-
Press Transfer
Dial Call Park Set code # 6
Dial Call Park location 01~64
Use paging to announce call
Press Speaker to hang up
Note 1: If not picked up, the call will recall to you.
Note 2: You can Park Intercom or trunk calls.
Note 3: If the dialled Call Park location is busy, dial another Call Park location (01~64).

Station Busy/No Answer Options

Callback
Set
When calling a busy or unanswered
telephone:
Dial Automatic Callback code #
-OR-
Press Camp softkey
Replace handset
Answer
When both telephones are idle originating telephone rings:
Lift the handset
Call is placed automatically (if Callback Automatic Answer is enabled)
Note 1: If the available extension was unanswered (not busy), the Callback goes
through after the next use of the extension.
Note 2: If you have Callback
formerly busy extension when you lift the handset. If you do not have
Automatic Answer you must press the ringing line appearance to place the
call.
10
Retrieve
From any station:
key
Cancel
Automatic Answer, you automatically place a call to the
Lift the handset
Press the programmed Park
-OR-
Dial Call Park Retrieval code
6
Dial Call Park Location 01~64
Converse
Press Speaker
Dial 770
-OR-
Press Camp-On key (Code 35)
-OR-
Press Exit followed by Clbk
softkey and choose the desired
softkey option.
key
Callback