Table 47: Detailed Associated Client Status - D-Link DWS-3000 Series User Manual

Software User Manual
02/15/2011
Field
Bandwidth Limit Down
Bandwidth Limit Up
• Click Refresh to update the screen with the most current information.
Viewing Detailed Associated Client Status
For each client associated with an AP that the switch manages, you can view detailed status information about the client and
its association with the access point.
Table 47 describes the information available on the Detail page for the associated client status.
Field
MAC Address
SSID
AP MAC Address
BSSID
Location
Status
Radio
Channel
VLAN
User Name
Transmit Data Rate
Inactive Period
Age
NetBIOS Name
Tunnel IP Address
Document 34CS3000-SWUM104-D10
Table 46: Associated Client QoS Status

Table 47: Detailed Associated Client Status

Description
The Ethernet address of client station. To view details about a different client, select its MAC
address from the menu.
Indicates the network on which the client is connected.
MAC address of the AP to which this client is associated.
Indicates the Ethernet MAC address for the managed AP VAP where this client is associated.
Location of the AP to which this client is associated.
Indicates whether or not the client has associated and/or authenticated. The valid values are:
• Associated - The client is current associated to the managed AP.
• Authenticated - The client is currently associated and authenticated to the managed AP.
• Disassociated - The client has disassociated from the managed AP, if the client does not
roam to another managed AP within the client roam timeout, it will be deleted.
Indicates the radio on which the client is associated.
Indicates the operating channel for the client association.
If client is on a VAP using VLAN data forwarding mode, indicates the current assigned VLAN.
Indicates the user name of client that have authenticated via 802.1X, clients on networks with
other security modes will not have a user name.
Indicates the rate at which the client station is currently transmitting data.
For current association, period of time that the AP has not seen any traffic for the client.
Indicates the time in seconds since the switch has received new association data for this
client.
A unique 16-byte identifier that NetBIOS services use to identify resources on a network.
This field is blank for all non-tunneled clients. For a tunneled client, this is the assigned tunnel
IP address.
D-Link Unified Access System
Description
Shows the maximum rate at which the client receives traffic from
the AP in bits per second. The rate shown in this field is the
configured value rounded down to the nearest 64 kbps. A value of
0 means no bandwidth limiting is in effect in this direction.
Shows the maximum rate at which the client transmits traffic to the
AP in bits per second. The rate shown in this field is the configured
value rounded down to the nearest 64 kbps. A value of 0 means
no bandwidth limiting is in effect in this direction.
Page 145