Monitoring All Access Points; Figure 60: All Access Points - D-Link DWS-3000 Series User Manual

D-Link Unified Access System Software User Manual
02/15/2011

Monitoring All Access Points

The Monitoring > Access Points > All Access Points page shows summary information about managed, failed, and rogue
access points the switch has discovered or detected.

Figure 60: All Access Points

In the AP listing, a green font color indicates a Managed AP. All other APs are listed in red, irregardless of their type: Failed,
Rogue, or Peer Managed.
You can manually delete status entries. To clear all APs from the All Access Points status page except Managed Access
Points, click Delete All.
To configure an Authentication Failed AP to be managed by the switch the next time it is discovered, select the check box
next to the MAC address of the AP and click Manage. You will be presented with the Valid Access Point Configuration page.
You can then configure the AP and click Submit to save the AP in the local Valid AP database. If you use a RADIUS server
for AP validation, you must add the MAC address of the AP to the AP database on the RADIUS server. For more information,
see Appendix B:, "Configuring the External RADIUS Server" on page 207.
To identify an AP as an Acknowledged Rogue, select the check box next to the MAC address of the AP and click
Acknowledge. The switch adds the AP to the Valid AP database as an Acknowledged Rogue.
To identify an AP as a rogue (again), select the check box next to the MAC address of the acknowledged AP and click
Unacknowledge. The switch deletes the AP from the Valid AP database.
Click Refresh to update the screen with the most current information.
When the Auto Refresh option is selected, the page will be refreshed after every 30 seconds.
To view additional information about the detected AP, click the MAC address of the AP.
Page 124 Document 34CS3000-SWUM104-D10