D-Link DWS-3000 Series User Manual page 169

Software User Manual
02/15/2011
Field
Protocol Mode
Verification Mode
User Logout Mode
Enable Redirect Mode
Redirect URL
User Group
Idle Timeout (secs)
Document 34CS3000-SWUM104-D10
Table 63: CP Configuration (Cont.)
Description
Choose whether to use HTTP or HTTPs as the protocol for the
portal to use during the verification process.
• HTTP: Does not use encryption during verification
• HTTPS: Uses the Secure Sockets Layer (SSL), which requires a
certificate to provide encryption. The certificate is presented to
the user at connection time.
The default is HTTP.
Select the mode for the CP to use to verify clients:
• Guest: The user does not need to be authenticated by a
database.
• Local: The switch uses a local database to authenticate users.
• RADIUS: The switch uses a database on a remote RADIUS
server to authenticate users.
The default is Guest.
Select the check box to specify that the user logout will be used.
Selecting the check box enables client side de-authentication
requests for this configuration.In order for the user logout to
function properly, the client browser must be configured such that
javascript is enabled and popup windows are allowed. For more
information, see
page 170.
Select the check box to specify that the CP should redirect the
newly authenticated client to the configured URL. If the check box
is clear, the user sees the locale-specific welcome page after a
successful verification.
Specify the URL to which the newly authenticated client is
redirected if the URL Redirect Mode is enabled. The range is 0-
256 characters.
If the Verification Mode is Local or RADIUS, assign an existing
User Group to the captive portal or create a new group. All users
who belong to the group are permitted to access the network
through this portal. The User Group list is the same for all CP
configurations on the switch.
The User Group field also allows you to add, delete, or rename
user groups for all captive portals.
• To assign an existing user group to the CP, select it from the
menu.
• To create a new user group, enter the group name in the blank
field and click Add. The name can be 0-32 characters. The
default name is Default.
• To delete a user group, select it from the menu and click Delete.
Note: The User Group fields are unavailable if the Verification
Mode is Guest.
• To change the name of an existing user group, select the name
to change from the menu, enter the new name in the blank field,
and click Modify.
Enter the number of seconds a user can remain idle before
automatically being logged out. If the value is set to 0 then the
timeout is not enforced. The range is 0 to 900. The default value
is 0.
Note: Idle timeout is not supported for wired clients.
D-Link Unified Access System
"Customizing the Captive Portal Web Page" on
Page 169