Figure 3.14 Status When There Is An Error In The Memory (Mirror Maintenance Mode); Figure 3.15 Status When The Error Had Occurred In The System Was Restarted (Mirror Maintenance Mode) - Fujitsu PRIMEQUEST 2000 Series Administration Manual

CHAPTER 3 Component Configuration and Replacement (Add, Remove)
3.2 High availability configuration
- Since the memory mirror group having a failure suspected DIMM operates in the Non Mirror, the status
would be Partial Memory Mirror.
- Since half the number of DIMMs having a failure suspected DIMM in a Partial Mirrored memory group will
not be incorporated, the memory capacity seen from the operating system will be maintained.
The memory incorporation status before and after a partition restart is shown below.
FIGURE 3.14
Status when the error had occurred in the system was restarted (mirror maintenance mode)
FIGURE 3.15
Status when there is an error in the
memory (mirror maintenance mode)
46
C122-E175-02EN