Dr Command Package Install/ Uninstall; Figure 4.1 [Mode] Window (Dynamic Reconfiguration) - Fujitsu PRIMEQUEST 2000 Series Administration Manual

CHAPTER 4 PCI Card Hot Maintenance in Red Hat Enterprise Linux 6
4.1 Dynamic Reconfiguration (DR)
Dynamic Reconfiguration

4.1.2 dr Command Package Install/ Uninstall

This section describes the install /uninstall of the dr command package.
The dr command can be applied using the SVIM application wizard. When installing after building the system,
procure the package from Fujitsu Web download site, and install following the procedure below.
<Common install /uninstall>
Use FJSVdr-util-RHEL<Version number>-x.x.x-x-x86_64.tar.gz.
The file name for the RHEL6 dr command package is FJSVdr-util-RHEL6-x.x.x-x-x86_64.tar.gz. the following
files are stored.

FIGURE 4.1 [Mode] window (Dynamic Reconfiguration)

Item
current status
setting
Description
Setting status of the current DR function
(Enable/Disable)
Dynamic Reconfiguration function Enable/Disable
setting
-Enable
-Disable (Default)
60
C122-E175-02EN