Mac Lockout; Lockout-Mac - HP 530 Management Manual

MAC Lockout

Use these commands to control MAC lockout functions on the access point.
Command Function
[no] lockout-mac Adds or removes the selected MAC address to
<mac address> the MAC Lockout list.
show lockout-mac Shows all entries in the MAC Lockout list.
lockout-mac clear Clears a selected MAC address or all MAC
<mac address> | all addresses from the MAC Lockout list.

lockout-mac

This command adds or removes entries in the MAC Lockout list on the device.
Syntax
lockout-mac <mac address>
no lockout-mac <mac address>
• mac address - Specifies an entry in the MAC Lockout list. The no
version of the command removes the specific MAC address entry
from the MAC Lockout list. Valid format is 00:00:00:00:00:00 -
FF:FF:FF:FF:FF:FF.
Default
None
Command Mode
Global Configuration
Example
ProCurve Access Point 530# configure
ProCurve Access Point 530(config)# lockout-mac
00:14:C2:A5:09:8D
ProCurve Access Point 530(config)#
Command Line Reference

MAC Lockout

Mode Page
GC 9-75
MC 9-76
GC 9-76
9-75