Qos Ap-Params - HP 530 Management Manual

qos ap-params

This command configures QoS-related parameters on the device for this radio.
Syntax

qos ap-params

<voice | video | best-effort | background> { [aifs <aifs>] [cwmin
<cwmin>] [cwmax <cwmax>] [burst <burst>]}
• voice - High priority queue, minimum delay. Time-sensitive data such
as VoIP and streaming media are automatically sent to this queue.
• video - High priority queue, minimum delay. Time-sensitive video data
is automatically sent to this queue.
• best effort - Medium priority queue, medium throughput and delay.
Most traditional IP data is sent to this queue.
• background - Lowest priority queue, high throughput. Bulk data that
requires maximum throughput and is not time-sensitive is sent to this
queue (FTP data, for example).
• [aifs <aifs>] - Arbitration Inter-Frame Spacing (AIFS) specifies a
wait time in milliseconds for data frames. Valid values are: 1-255.
• [cwmin <cwmin>] - Specifies the Minimum Contention Window QoS
parameter. The value specified is the lower limit (in milliseconds) of
a range from which the initial random backoff wait time is deter-
mined. Valid values for the "cwmin" are 1, 3, 7, 15, 31, 63, 127, 255,
511, or 1024. The value for "cwmin" must be lower than the value
for "cwmax".
• [cwmax <cwmax>] - Specifies the Maximum Contention Window
QoS parameter. The value specified is the upper limit (in millisec-
onds) of a range from which the initial random backoff wait time is
determined. Valid values for the "cwmax" are 1, 3, 7, 15, 31, 63, 127,
255, 511, or 1024. The value for "cwmax" must be higher than the
value for "cwmin".
• [burst <burst>] - Specifies the Maximum Burst Length QoS param-
eter. This value specifies the length of time allowed for a packet burst
(collection of transmitted multiple frames without header informa-
tion) on a wireless network.Valid values for maximum burst length
are 0.0 through 999.9.
Defaults:See tabled output.
Command Line Reference
QoS Commands
9-151