Copy Startup-Config - HP 530 Management Manual

Command Line Reference
Flash/File Commands
9-52
Syntax
copy custom-default startup-config
Default Setting
N/A
Command Mode
Manager Exec
Example
In this example, the copy custom-default startup-config command resets the
startup configuration to the same setting as the custom-default configuration.
ProCurve Access Point 530# copy custom-default startup-
config
ProCurve Access Point 530#
Related Commands
erase (page 9-54)

copy startup-config

This command copies the startup configuration file from the device to the
specified remote server.
Syntax
copy startup-config <ftp | scp | tftp> <flash | startup-config> <ip> <file> [user-
name <user> password <pass>]
startup-config-Specify that the type of file to copy, is the startup
•
configuration file.
• ftp | scp | tftp-Specify the type of remote server where the file will be
placed. Possible servers are File Transfer Protocol (FTP), Secure
Copy Protocol (SCP), and the Trivial File Transfer Protocol (TFTP).
ip-The IP address of the remote server.
•
file-The filename of the file on the remote server.
•
• user-name <user> password <pass>-Specify the username and pass-
word for the FTP and SCP remote servers. These parameters are not
used for TFTP.
Default Setting