Figure 4-20 Battery Control Connection To Base Cabinet Power Supply - Panasonic DBS 576 Technical Manual

Chapter 4. - Installing Additional Cabinets
13. Screw the +24V (white) and GND (black) cables of the BATT-CTRL harness to
Figure 4-20. Battery Control Connection to Base Cabinet Power Supply
14. Make certain the base cabinet power supply is OFF.
15. Plug the AC cable into an outlet with a dedicated breaker.
Note:
16. The power switch of upper and middle cabinets should be kept ON so that the
4-18
the bottom power supply unit in base cabinet.
An dedicated external circuit breaker must be used.
power switch of base cabinet controls power for all cabinets.
DBS 576 (USA), issued 6/2/98
Section 300-Installation
576-13-300