Dbs 96 Digital Extensions; Table 5-24 Relationship Of Programming Address To Dbs Card Postion - Panasonic DBS 576 Technical Manual

Chapter 5 - Trunks and Extensions

DBS 96 Digital Extensions

Guidelines
• Digital extensions are connected to a DEC card installed in an extension slot of
• The CBLDBS kit (VB-44452) must be installed to connect the DBS 576 to the
• Connect digital extensions to digital key phones via normal building wiring.
• See Table 7-9 on page 7-7 for the maximum loop circuit resistance and distance.
• The DBS 96 cabinet will only accept DBS DEC cards. No other DBS line or trunk
• The DBS 576 DEC/8 card cannot be installed in the DBS 96 cabinet.
• Up to two DBS cabinets may be connected to the DBS 576.
• Up to 9 DBS DEC cards can be installed in the DBS 96 cabinet therefore
• The programming address to the DBS Card slot positions are as follows:
Table 5-24. Relationship of Programming Address to DBS Card Postion
5-34
the DBS 96 cabinet. A maximum of 8 extensions can be connected to each DBS
DEC card.
DBS. One CBLDBS MDF Interface (part of the CBLDBS kit) must be installed
to support connection of extension lines from the Main Distribution Frame
(MDF) to the DBS cabinet. See "Connecting DBS 576 and DBS 96 Systems" on
page 4-28 for information.
card may be used with a DBS 576.
supporting up to 72 ports. However, the DBS 96 cabinet logically occupies 96
port addresses; 24 ports are not available. For each DBS 96 cabinet installed, the
maximum number of ports in the overall system is reduced by 24 ports. If two
DBS 96 cabinets are installed, the maximum number of overall ports is reduced
by 48 ports.
DBS 576 Programming
Address Card Slot (SS)
Slot 1
Slot 2
Slot 3
Slot 4
Slot 5
Slot 6
Slot 7
Slot 8
Slot 9
Slot 10
Slot 11
Slot 12
DBS 576 (USA), issued 6/2/98
DBS DEC card
DBS DEC Card Position
Not Available
EC1
EC2
EC3
Not Available
EC4
EC5
EC6
Not Available
EC7
EC8
EC/TK
Section 300-Installation
CBLDBS MDF
Connector
Not Applicable
EXT A
Not Applicable
EXT B
Not Applicable
EXT C
576-13-300