Figure 5-4 Connecting Loop-Start Trunks - Panasonic DBS 576 Technical Manual

Chapter 5 - Trunks and Extensions
3. Install the LTRK/8 card in any available flexible slot.
4. Referring to Figure 5-4 and Table 5-4 on page 5-9, connect the trunks to the
Figure 5-4. Connecting loop-start trunks
5-8
MDF Interface Card using the supplied modular cable.
Note:
Labels are supplied with the MDF Interface Card to identify the Flexible
Slot cable connection. Make certain to attach a label on both ends of the cable
and at the MDF Interface Card connector.
DBS 576 (USA), issued 6/2/98
Section 300-Installation
576-13-300