Table 5-12 Line Selection Switch (Sw1: Select) On Tbri/4 Card; Figure 5-8 Installation Of Sync Package (Example: Installation On Tsw288 Card) - Panasonic DBS 576 Technical Manual

Chapter 5 - Trunks and Extensions
Table 5-12. Line Selection Switch (SW1: SELECT) on TBRI/4 Card
Switch Setting No. Settings
0
1
2
3
4
5 to 9
Installation
1. Align the CN8 connector of the CPC96 card or the CN5 connector of the
Figure 5-8. Installation of Sync Package (Example: Installation on TSW288 Card)
2. Insert the CPC96, TSW288, or TSW576 card in the specified slot.
3. Insert the TBRI/4 card in an available flexible slot.
4. Connect the 8-conductor modular jack via the NT1 to the T-point ISDN
5-20
OFF (default setting when unit is shipped)
1st interface condition displayed by LAYER1 LED and LAYER2 LED
2nd interface condition displayed by LAYER1 LED and LAYER2 LED
3rd interface condition displayed by LAYER1 LED and LAYER2 LED
4th interface condition displayed by LAYER1 LED and LAYER2 LED
Not available
TSW288 or TSW576 card with the holes of spacers and connect the
synchronization package (VB-44460).
interface.
DBS 576 (USA), issued 6/2/98
Section 300-Installation
576-13-300