Panasonic KX-TD500 User Manual page 281

P
Conditions
• A phantom number must be assigned by System Programming before assigning the
Phantom button by Station Programming.
• If several extensions have the same phantom extension number, they will ring
simultaneously.
• A maximum of 448 phantom numbers can be assigned by System Programming.
PT • The Phantom button cannot be used for feature settings such as "Call Forwarding."
PT • Automatic Hold
If Automatic Hold is enabled by COS programming, you can transfer the call without
first pressing the TRANSFER button, that is, simply by pressing a Phantom button.
PT
• An incoming CO call may come in on a Phantom button directly depending on System
Programming. In this case, a CO button (S-CO, G-CO or L-CO) associated with the
incoming CO call should be assigned on a PT.
Programming References
• Station Programming (Section 2)
Flexible Button Assignment — Phantom Button
Phantom Button Ringing ON/OFF Assignment
• User Programming (Section 3)
[005] Flexible CO Button Assignment
• System Programming – Installation Manual, Section 4
4.4.2. Line - Extension Line
4.5.2 Features - Phantom Extension
Feature References
None
4-166
Station Features and Operation
4.3 Station Features and Operation
— Flexible CO Key Assignment