2.2
Station Speed Dialing Number/Name Assignment
[KX-T7235/KX-T7431/KX-T7433/KX-T7436 only]
Allows you to assign frequently dialed numbers and names to each Function button on
your PT.
For KX-T7235 and KX-T7436 users
To store a number
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
7235/7436
F1
F2
F3
F4
PT-PGM Mode
F5
Press Function (F1-F10).
• The STORE indicator light turns off.
• The display shows the current status.
(If nothing is stored, "Not Stored" is displayed.)
<PT Display Example>
9-123-4567
CLR
• Up to 16 digits, consisting of 0 through 9,
("[" or "]" : secret) and CONF (-:hyphen), can be stored.
• To store the telephone number of an outside party, the line access code (9 or 801
through 848) must be stored as the leading digit.
• To erase the entry, press the CLR (S2) button.
• To store a name, press the NEXT (S3) button and go to step 3 in "To store a name"
as described in the following procedure.
— To exit the Station Programming mode: Press [PROGRAM].
2-42
Station Programming
Station Programming
F6
F7
F8
Enter the desired number
F9
(extension number,
F10
phone number, etc.).
(–Outside number, 123-4567,
is now programmed.)
NEXT
desired number
• The STORE indicator lights.
• The display shows the initial
programming mode.
, #, FLASH, PAUSE, INTERCOM,
AUTO DIAL
STORE
Press STORE.