Panasonic KX-TD500 User Manual page 431

6
Examples — in Station Programming mode
E D
NGLISH ISPLAY
Account
C.W. Tone1
Clear Ready?
CO-10101
Conference
1400:CO Lock
1400:ICM Lock
1400:Unlock
Ext-1234
FWD/DND
Hands-free:Off
Hands-free:On
Handset
Headset
10101 <=>EXT1001
Loop-CO
Message Waiting
DAY/NIGHT
Not Stored
Pref.In :CO-02
Pref.In :NO
Pref.In :Ring
Pref.Out:CO-02
Pref.Out:ICM
Pref.Out:Idle
Pref.Out:No
Appendix
F D
RENCH ISPLAY
COMPTE
TON.APPEL1
ANNULER DONNEES?
LR-10101
CONFERENCE
1400:LR VERR.
1400:INTCM VERR.
1400:DEVERR.
PST-1234
RNV/NPD
MAINS LIB.:NON
MAINS LIB.:OUI
COMBINE
CASQUE
10101 <=>PST1001
BOUCLE DE LR
MESS. EN ATTENTE
JOUR/NUIT
NON MEMORISE
ENT.PREF:LR-02
ENT.PREF:NON
ENT.PREF:SONN
SOR.PREF:LR-02
SOR.PREF:INTCM
SOR.PREF:LIB.
SOR.PREF:NON
D
ESCRIPTION
Account button is assigned.
Select Call Waiting tone.
Available to clear Station Programming data.
Single-CO (S-CO) button is assigned.
Conference (CONF) button is assigned.
Complete to lock the outside calls of other extension.
— "Remote Station Lock Control".
Complete to lock the intercom calls of other extension.
— "Remote Station Lock Control".
Cancel "Remote Station Lock Control"
DSS button is assigned.
FWD/DND button is assigned.
Disable "Full One-Touch Dialing" mode.
Enable "Full One-Touch Dialing" mode.
Select Handset mode.
Select Headset mode.
Confirm jack number and extension number.
Loop-CO (L-CO) button is assigned.
Message Waiting (MESSAGE) button is assigned.
Day/Night button is assigned.
No programming is assigned.
Select "Prime Line (Outside Line) Preference —
Incoming".
Select "No Line Preference — Incoming".
Select "Ring Line Preference — Incoming".
Select "Prime Line (Outside Line) Preference —
Outgoing".
Select "Prime Line (INTERCOM) Preference —
Outgoing".
Select "Idle Line Preference — Outgoing".
Select "No Line Preference — Outgoing".
6-7
Appendix