User Programming Instructions; General Programming Instructions - Panasonic KX-TD500 User Manual

3.1

User Programming Instructions

General Programming Instructions

User Programming allows you, any extension user who knows the User Programming
Password, to program the following system features from your telephone individually.
• [000] Date and Time Set
• [001] System Speed Dialing Number Set
• [002] System Speed Dialing Name Set
• [004] Extension Name Set
• [005] Flexible CO Button Assignment
• [006] Caller ID Dial Set
• [007] Caller ID Name Set
• [008] Absent Messages
• [009] Quick Dial Number Set
To program, you need to switch your telephone to the User Programming mode.
During the programming mode, your extension is treated as a busy extension.
If you want to make a normal call operation, you must finish the programming mode.
Default Setting
This system has default factory settings.
Required Telephone Set
One of the following Proprietary Telephone (PT) sets with display is required for User
Programming:
• Digital Proprietary Telephone (DPT): KX-T7436, KX-T7433,
• Analog Proprietary Telephone (APT): KX-T7130, KX-T7030
Soft Buttons and SHIFT Button on the Display PT
Three soft buttons are provided just below the display of the following Digital
Proprietary Telephones (DPTs): KX-T7230, KX-T7235, KX-T7433, KX-T7436.
Functions of these Soft buttons vary as the programming procedures advance step by
step. Those functions that are currently assigned to the buttons are shown on the lower
line of the display. If the SHIFT button indicator is on, two functions are available for
each Soft button. To alternate between the two functions, press the SHIFT button on the
right side of the display.
3-2
User Programming
KX-T7431, KX-T7235, KX-T7230