Initial Setting For Kx-T7200 Series; Display Contrast Adjustment (Kx-T7230 And Kx-T7235 Only); When Using The Headset; Changing The Ringing Tone Of A Co Button/Intercom Button - Panasonic KX-TD500 User Manual

1.1

Initial Setting for KX-T7200 Series

Display Contrast Adjustment (KX-T7230 and KX-T7235 only)

A Soft button and the VOLUME Control button are used to adjust the display contrast.
The contrast level is indicated on the display by the number of asterisks. You can adjust
the contrast level under the following conditions:
1.) When on-hook, or
2.) During an outside/intercom call.
1
CONT
S 1 S 2
2
VOLUME

When using the headset

The Panasonic Digital Super Hybrid System supports the use of a headset with a
proprietary telephone (PT). When you use the headset (optional), you should switch the
selection mode first. Selection is explained in the "Handset/Headset Selection" in Station
Programming (Section 2).
To change to the headset mode
Press: [PROGRAM] [9] [9] [9] [2] [STORE] [PROGRAM].
Changing the ringing tone of a CO button / INTERCOM button
There are eight ringer frequencies available for each CO (Group-CO, Loop-CO, Single-
CO) button, DN (PDN, SDN) button and INTERCOM button. If you wish to change
them, refer to the "Ringing Tone Selection for CO Buttons" or "Ringing Tone Selection
for INTERCOM Button" in Station Programming (Section 2).
Configuration
1. Press the CONT (S1) button.
S 3
2. Press the VOLUME (UP
• The display shows:
<Example>
/ DOWN
Contrast:***
) Control button.
(— contrast level 3)
DPT Overview
1-23