One-Touch Dialing Button - Panasonic KX-TD500 User Manual

2.2

One-Touch Dialing Button

Allows you to assign a Flexible (CO, DSS, PF) button as a One-Touch Dialing button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
PT
Press the desired Flexible
(CO, DSS, PF) button you
wish to assign as a
One-Touch Dialing button.
<PT Display Example>
• Up to 16 digits can be stored.
• To erase an incorrect entry, press the CLR (S2) button or the
TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button in the
Station Programming mode.)
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
• The number can be an extension number, telephone number or a feature number. Up
to 16 digits can be stored in a One-Touch Dialing button.
• To store the telephone number of an outside party, a line access code (9, or 801
through 848) must be stored as the leading digit.
• You can store a number consisting of 17 digits or more by dividing it and assigning it
in two One-Touch Dialing buttons. In this case, the line access code should be stored
in the first button.
• You can use 0 through 9,
FLASH : hook flash
PAUSE : pause
CONF
INTERCOM : for secret dialing
• KX-T7220 and KX-T7250 telephones do not have a PAUSE button. The PROGRAM
button can be used instead of the PAUSE button while programming.
2-18
Station Programming
Station Programming
(Assignment)
2
Enter the desired number
Dial 2.
(extension number,
phone number, etc.).
CLR
, #, PAUSE, FLASH, CONF and INTERCOM for storing.
: — (hyphen)
# : for changing the dialing mode (Pulse to Tone)
desired number
• The STORE indicator lights.
• The display shows the initial
programming mode.
AUTO DIAL
STORE
Press STORE.