Function Setting - Minimum Difference Between Heating And Cooling Set Points - LG PREMTB10U Installation & Operation Manual

OPERATION INSTRUCTION
30
Function Setting - Minimum Difference between heating and
cooling Set points
It is function to setup minimum difference between heating and cooling set points.
• When changing the desired cooling temperature, in case of that the difference with the
heating temperature becomes lesser than its minimal value of difference, it lowers the de-
sired heating temperature automatically.
• When changing the desired heating temperature, in case of that the difference with the
heating temperature becomes lesser than its minimal value of difference, it raises the de-
sired cooling temperature automatically.
* If power supplying is stopped for more than 50 hours, please check the current time and correct it.
Repeat pressing
1
until icon flash.
Press button to change.
2
❈ minimum difference value
: 0~10°F(0~5°C)
Press button to complete
3
and active the setting process.
4 Press button to exit or
system will automatically release
without any input after 60
seconds.
❈ When exiting without pressing
set button, the manipulated
value is not reflected.
button