Table of Contents
Advertisement
Installer Setting - Dry Contact Mode Setting
Dry contact function is the function that is possible to use only when dry contact equipment is
separately purchased/setup.
▶ What is Dry Contact?
Like hotel card key or occupancy sensor, it is the signal of the point of contact when
using air-conditioner by interlocking.
• Please refer to dry contact manual for more details.
INSTALLATION INSTRUCTION
If pressing
button long for 3
1
seconds, it enters into Thermostat
installer setup mode.
- If pressing once shortly, it enters
into user setup mode. Please press
more than 3 seconds for sure.
2
If pressing
button repeatedly, it moves
to Thermostat dry contact mode setup menu
as picture below.
3
Select Dry contact setting by
pressing button.
(00 : Manual, 01 : Automatic)
Function Code
Dry Contact
setting value
Press
button to save.
4
5
Pressing
button will exit settings mode.
❈ After setup, it automatically gets out of
setup mode if there is no button input for
25 seconds.
❈ When exiting without pressing set button,
the manipulated value is not reflected.
71
Hide quick links:
Advertisement
Table of Contents
