Installation Method - LG PREMTB10U Installation & Operation Manual

INSTALLATION METHOD

1
Please fix tightly using provided screws after placing Thermostat backplate on the placewhere
you like to setup.
- Please set it up not to bend because poor setup could take place if backplate bends.Please
set up Thermostat board fit to the electrical box if there is a electrical box.
- Install the product so as not to make a gap with the wall side and to prevent shaking afterthe
installation.
2
Can set up Thermostat cable in one of three possible directions.
- Setup direction: back, top, or right
- If setting up Thermostat cable into top or right side, please set up after removing Thermostat
cable guide groove.
C Remove guide groove with long nose pliers.
① Back through the wall
② Top guide groove
③ Right side guide groove
1
2
3
<Wire guide grooves>
INSTALLATION METHOD
2
3
55