Table of Contents
Advertisement
Installer Setting - Thermistor
This is the function to select the temperature sensor to judge the room temperature.
<Thermistor Table>
Temperature sensor selection
01
Thermostat
02
Indoor unit
Cooling
03
2TH
Heating
C The function of 2TH has different operation characteristics according to the product.
C For the indoor temperature below 10 °F, it displays the value perceived by the sensor of the
Thermostat regardless of the temperature sensor setting.
If pressing
1
seconds, it enters into Thermostat
installer setup mode.
- If pressing once shortly, it enters into
user setup mode. Please press more
than 3 seconds for sure.
If moving to room temperature perception
2
sensor selection menu by pressing
button, it indicates as picture below.
3
Set Thermistor value by pressing
button. (01: Thermostat,
02: Indoor, 03: 2TH)
Function Code
Press
4
Pressing
5
❈ After setup, it automatically gets out of
setup mode if there is no button input for
25 seconds.
❈ When exiting without pressing set button,
the manipulated value is not reflected.
Operate according to Thermostat temperature sensor
Operate according to indoor unit temperature sensor
Operate according to higher temperature by comparing indoor
unit's and Thermostat's temperature.
(There are products that operate at a lower temperature.)
Operate according to lower temperature by comparing indoor
unit's and Thermostat's temperature.
INSTALLATION INSTRUCTION
button long for 3
Thermistor setting
button to save.
button will exit settings mode.
Function
67
Hide quick links:
Advertisement
Table of Contents
