Installer Setting - E.s.p. Function - LG PREMTB10U Installation & Operation Manual

Installer Setting - E.S.P. Function

This is the function that decides the strength of the wind for each wind level and because this
function is to make the installation easier.
• If you set ESP incorrectly, the air conditioner may malfunction.
• This setting must be carried out by a certificated-technician.
Function code,
ESP code
ESP value
• ESP setting may not work on products without weak or power fan speed settings.
INSTALLATION INSTRUCTION
If pressing button long for 3
1
seconds, it enters into Thermostat
installer setup mode.
- If pressing once shortly, it enters into
user setup mode. Please press more
than 3 seconds for sure.
If entering into ESP setup mode by using
2
button, it indicates as the picture
below.
3 Select ESP fan step by pressing
button. (01: very low, 02: low, 03:
medium, 04: high, 05: very high)
Move to ESP value setting by pressing
4
button.
(It is 000 when delivering
from the warehouse.)
Press button to setup ESP value.
5
(It is possible to setup ESP
value from 1 to 255, and 1 is
the smallest and 255 is the
biggest.)
65
ESP step
Function Code ESP value