Table of Contents
Advertisement
INSTALLATION INSTRUCTION
68
Installer Setting - Ceiling Height Selection
This function is to adjust FAN Airflow rate according to ceiling height (For ceiling type product)
<Ceiling Height Selection Table>
Ceiling Height Level
01
Low
02
Medium
03
High
04
Very high
• Ceiling height setting is available only for some products.
• Ceiling height of 'Very high' function may not exist depending on the indoor unit.
• Refer to the product manual for more details.
1
If pressing
seconds, it enters into Thermostat
installer setup mode.
- If pressing once shortly, it enters into
user setup mode. Please press more
than 3 seconds for sure.
If moving to ceiling height selection menu by
2
pressing
below.
Select ceiling height value by pressing
3
03:High, 04:Very high)
Function Code
Press
4
Pressing
5
❈ After setup, it automatically gets out of
setup mode if there is no button input for
25 seconds.
❈ When exiting without pressing set button,
the manipulated value is not reflected.
Decrease the indoor airflow rate 1 step from standard level
Set the indoor airflow rate as standard level
Increase indoor airflow rate 1 step from standard level
Increase indoor airflow rate 2 steps from standard level
button long for 3
button, it indicates as picture
button. (01:Low, 02:Medium,
ceiling height setting
button to save.
button will exit settings mode.
Description
Hide quick links:
Advertisement
Table of Contents
