Table of Contents
Advertisement
INSTALLATION INSTRUCTION
76
Installer Setting - Setting temperature range
This function is used for select setting temperature range option.
In case of the setting temperature range option2( 31:01), please note that the setting of the re-
mote controller (with cable) can be altered under below circumstances. (Changes in setting ex-
ample)
- In case of cooling at 30~37.5 °C(64~99 °F), it is changed to cooling at 86 °F(30 °C).
- In case of heating at 4~15.5 °C(40~86 °F), it is changed to heating at 60 °F(16 °C).
- If it is on the 2Set Mode, it is changed to the current operation mode(cooling or heating) of the
indoor unit.
Situation where changes in the setting occur
a. Operates the Auto address work and pipe search in situations such as product installment and
service.
b. Occurrence of errors and deactivation.
c. Command generated by the central control, outdoor unit, Dry contact, Remote controller, in-
door unit switch.
If pressing
button long for 3
1
seconds, it enters into Thermostat
installer setup mode.
- If pressing once shortly, it enters
into user setup mode. Please press
more than 3 seconds for sure.
2
Repeat pressing
Function code 31.
3
Select Temperature
range by pressing
button.
00(option1):
60~86 °F / 16~30 °C (default)
01(option2):
40~99 °F / 4~37.5 °C
Press
button to save or
4
release.
When the set values are changed,
the items below will be initialized.
- Setting temperature
(default: Cooling: 86 °F(30 °C)/ Heating: 60 °F(16 °C))
- Set back temperature
(default: Cooling: 86 °F(30 °C)/ Heating: 60 °F(16 °C))
-Weekly Reservation
5
Press
button to exit or system
will automatically exit after 25
seconds without any input.
button to select
Hide quick links:
Advertisement
Table of Contents
