Panasonic 308 Installation Instructions Manual page 148

SECTION 400 (Version 3.0) DES
Issue 1 January 1990 FF-3 Extension mode
FF3-(l - 72)#-26#-(0 - 13)#
Large LCD information condition on the
idle status (Idol) .
The contents are set for display on a large LCD
when the extension is in the idle (On hook) status.
O#: No chancre
l#: Change to menu information
28: Change to personal speed
dial
index
3#: Change to system speed dial index
48: Change to extension index
5#: Change to guidance menu 1
(ABSES, AC-CODE,LKOUT,REMDR,FF-Key)
6#: Change to guidance menu 2
(KD,CFWD/AII call/No ans/On busy/Out side)
7#: Change to guidance menu 3
(PGM,PKHLD,DND,SVDI,SGM)
88:
Change
to guidance menu 4 (Attendant only)
(Timer set,Timer adjust,
Attendant cancel,Day/ Night)
9isc: Change to guidance menu S (Attendant only)
(SSD name number,EXT name number
Maintenance code,Key code,DISA code)
10#: Change to guidance menu 6 (Attendant only)
(Program mode.Outgoing amount
Incoming amount,Use SSD amount)
1 l#: Change to function 1
(BGM,DND, REMDR,ABSES,CFWD,MUTE,
LKOUT,MAIL,BROD,ABS-CSL)
12#:Changetofunction 2
(DT,HS, MSGE-CSLMSGE-CSL, CONF)
13#: Change to function 3
(PGANS,Page-Ul/2/3/4/5/6i7, All Zone)
14#: Change to function 4
(CONF,TONE,Set MSG.fRFR,RLSE)
15#: Change to function 5
(SADl/REDl/DTMFCV/RLSE,AC-CODE,MUTE)
16#: Change to function 6
(C-WATNG,MSGE,CO-QNG,OVRDE,RLSE)
17#: Change to function 7
(AC-CODE,LCR.TRK-G/81/82/83/84/85186)
18#: Change to function 8
(UNA-PUPfGroup/DirecUPage)
19f:
Change
to function 9
(MCO, LCR. KD,SSD, EXT,MUTE,PAGE,TONE)
20#:
Change to function
10
(MSGE,TRFR,RLSE,CONF,MUTE,DND,TONE,
PKHLD)
21#: Change to function 11
(REDLDTMFCV,
AC-CODE,SSD,KD,RLSE,MUTE.EXT)
22%: Change to function
12
(SADI,KD,SSD,CONF,
AC-CODE,MUTE,RLSE,TRFR,REMDR)
23#: Change to function 13
(PGANS,HS,~ONE,MUTE,~NA,EXT,PSD,SSD)
24#: Change to function 14
(TAKBK.RLSE,CONF,TRFR,DND,PKHLD)
-37-