Redial; Speed Dial - Toshiba IP5000 Series User Manual

Redial

Speed Dial

Personal Speed Dial
Making a Call Using
Speed Dial
IPedge UG 01/13
Use this button to redial the last number dialed from your telephone.
• To redial the last number, press
Speed Dial (SD) enables you to dial a sequence of up to 32 digits with a shorter
code. Dial sequences can include telephone numbers, authorization codes,
passwords feature activation codes, and pauses. Speed Dial may be used to
originate a call or invoked after a call is established. There are two types of Speed
Dial:
SD – All telephones in your system can share a list of up to 800
System
•
System Speed Dial numbers under the exclusive control of the System
Administrator. In some cases, System Speed Dial enables you to reach
numbers that you would not be allowed to dial directly from your telephone.
SD – Your System Administrator allocates a block of up to 100
• Station
personal SD numbers (10 per telephone). You have exclusive use of them
and you can create and change them from your own telephone. If you have a
9-Line LCD telephone, you can assign names to your station SD numbers to
appear on the Personal SD Directory display.
1. See your System Administrator to check how many personal Speed Dial
numbers are allocated to your telephone and if you have Speed Dial
capabilities enabled on your telephone.
2. Set up / Store your personal Speed Dial numbers.
3. Assign names to personal Speed Dial numbers (on supported models).
There are two ways to begin a Speed Dial Call.
1. Press Spdial on an IP5000-series digital telephone
*
or press the button on any telephone.
2. Dial the Station or System Speed Dial Number. Station Speed Dial numbers
occupy numbers 100~199. System Speed Dial numbers occupy numbers
200~999.
Table 7:
Feature
Speed Dial (Dialing an SD number)
a
Station
1
System
a. Stations must be assigned/enabled Speed Dial capabilities in system programming.
b. If your telephone does not have a Spdial button, press the * button, then dial the three digit Speed Dial
bin number (nnn).
TOSHIBA
Feature Operations
Redial * 0
or .
Feature Access Code Sequences
b
+ nnn
Spdial
nnn = 100~199 Station SD numbers
2 nnn
+
Spdial
nnn = 200~999 System SD numbers
IPedge
59