Tone First / Voice First Signalling; Tone First Signalling; Voice First Signalling - Toshiba IP5000 Series User Manual

Tone First / Voice
First Signalling
Tone First
Signalling
Voice First
Signalling
IPedge UG 01/13
MM = Month, example 03
DD = Day, example 12
The IP telephone date can only be changed one day before or after the
Note:
telephone system date. The day will change automatically when the date
is changed.
To change the time
From the IP telephone, dial #654 and enter HHMMSS#
•
Example: To change the time to 01:30 PM
HH = Hour, example 13 (range is 00~23, 24 hour clock must be entered)
MM = Minutes 30 (range is 00~60. It must be within 15 minutes of system
time.)
SS = Seconds (range is 00~60).
The time set must be within 15 minutes of system time.
Note:
To determine the signalling on the telephone circuit.
When the telephone rings and the called party must press Spkr or lift the handset
in order to receive the call.
The telephone does not ring when it is being called, rather a long tone is heard,
followed by the caller's voice coming through the speaker. This method
automatically starts in a hands free mode and allows both parties to speak with
each other.
The calling party has control over whether Tone First or Voice First
Note:
Signaling is being used. The ability to switch between the two is setup by
the System Administrator.
To change the signalling method while placing the call
1. Enter the extension number
2. Press 1 to turn on Tone First Signaling.
3. Press 2 to turn on Voice First Signaling.
TOSHIBA
IPedge
Feature Operations
61