Selecting The Reception Mode; Recording Paper Size - Toshiba DP80F Operator's Manual

Selecting the Reception Mode

The Automatic Reception Mode If Auto Receive mode is se-
(AUTO RECEIVE) is normally lected, press:
selected. You can change the
reception mode by pressing the
key.
Refer to Reception Mode selec-
If FAX/TAD mode is selected,
tion on page 62.
press:
Press:
If TEL/FAX mode is selected,
RECEPTION MODE
press:
1.FAX
2.FAX/TAD
3.TEL/FAX
4.MANUAL
If Manual Receive mode is se-
lected, press:
106

Recording Paper Size

This facsimile can use Letter and Legal size paper. The received document is recorded (printed) within
the Effective Recording Area of the paper.
Effective
Recording
C D
Area
B
A
NOTES:
• If the received document is equal to or shorter than the recording area of the paper, the received
document is printed at its actual size.
• If the received document is larger than the recording area of the paper, it will be vertically and
horizontally reduced to fit on the recording paper installed. The reception will be divided onto two
sheets if the document needs to be reduced to smaller than 73% of its original size.
Document
• If you desire to receive large originals without reduction or excessive paper usage, set the
"DISCARD" function to "ON." If the lower part of the original exceeds the recording paper by 13
mm or less, the image will be automatically discarded. This predetermined dimension is a service
function setting. Contact your Toshiba dealer for setup.
• If the "RX REDUCTION" function is "OFF", the larger original will be recorded on two or more
sheets. The top of the second page will repeat about 5 mm of the lower part of the first page.
D
Paper Size A B C
Letter: mm 279
216 212 274
inches 11.0
8.5 8.34 10.8
Legal: mm 216 212 351 356
inches
8.5 8.34 13.8 14.0
Recording
Paper