Toshiba DP80F Operator's Manual page 133

Continuous Polling - continued
5 6
Select the Day of the
Week
Select the day of the week to Enter the number of the remote
start polling. When the day-of- facsimile using any of the fol-
week range is displayed cor- lowing dialing methods.
rectly, press:
NOTES:
• To designate the start or
end day, use / to
move the entry point.
• Press / to
change the day.
After each entry, the selected
facsimile is displayed for 2 sec-
onds.
PROG. CONT. POLL
ENTER TEL NUMBER
Repeat this procedure until all
remote facsimiles are entered.
7
Enter the Number of Select the Security
Remote Facsimile Code Option
When all the remote facsimile
locations have been entered in
Step 6, press:
• One Touch Key Dialing
... See page 89
• Abbreviated Dialing
... See page 90
ADD SECURITY CODE
1.YES
• Alphabet Dialing
... See page 91
2.NO
• Keypad Dialing
... See page 92
If all of the remote facsimiles are
TOSHIBA facsimiles and the
same 4-digit security code is
ONE TOUCH= 24
programmed to the documents
PORTLAND PLANT
to be polled, press
go to Step 8.
If the remote facsimile is not a
TOSHIBA facsimile or no Secu-
PROG. CONT. POLL
rity Codes are in use, press:
ONE TOUCH= 24
No Security Code will be se-
lected and the facsimile will re-
turn to the Standby Mode.
The facsimile will automatically
start polling at the time set in
this procedure.
8
Enter the Security
Code
Enter the 4-digit security code
for the document to be re-
trieved.
ADD SECURITY CODE
[****]
and
When the 4-digit security code
is entered, press:
The procedure is now complete.
The display returns to the
Standby Mode.
The facsimile will automatically
start polling at the time set in
this procedure.
131