Table of Contents
Advertisement
Abbreviated Dialer Registration - continued
6
7
Enter the Telephone
Number - continued
The telephone number is dis-
Alternate Numbers are optional.
played on the bottom row of the
If the remote location does not
LCD display as you enter it.
have two or more facsimile units
Confirm that the number is cor-
in the same area, you can leave
rect.
this entry blank. (See page 65
for more information.)
FAX NUMBER
(MAX128)
Enter the Alternate Facsimile
[9583359
]
Number.
Then press:
ALT NUMBER (128 MAX)
[
]
Then press:
8
Enter an Alternate
Enter the Location
Number (Optional)
ID Name
Enter the Location ID name of
the remote party to be assigned
to the current Abbreviated Dial
Number.
See page 36 for more informa-
tion on Character Entry.
When the name is displayed
correctly on the LCD display,
press:
FAX OPTIONS
2.NO
1.YES
NAME
(20 MAX)
[
]
9
Select Communication Options
(Advanced Setup)
This setting will allow you to
9a
specify one or more of the fol-
lowing Communication Options
for the Abbreviated Dial Number
you are registering.
To skip the Communication Op-
tions, press:
Delayed Communication
Default=off
Select to program a trans-
mission start time.
Go to next step.
Transmission Report
Default=off
To select Communication Op-
Enables
or
disables
the
tions, press:
printing of a TX Report.
Line Monitor
Default=off
Enables or disables the line
When "1.YES" is selected, the
monitor speaker during dial-
FAX OPTIONS screen appears.
ing.
Follow the next steps for each
Fax Speed
item selection.
Default=off
Selects
a
lower
modem
speed for poor communica-
tion links.
Sub Address
Default=none
Specifies a Sub Address for
the Abbreviated Dial Number
being registered. The remote
unit must support Sub-Ad-
dress capabilities.
Select the
Communication
Option
FAX OPTIONS
1.DONE
2.DELAYED COMM.
3.TX REPORT
4.LINE MONITOR
5.FAX SPEED
6.SUBADDRESS
These items are outside
the LCD frame. To view
them, use the
scroll key.
67
Advertisement
Chapters
Table of Contents
