Dial Type Setting - Toshiba DP80F Operator's Manual

Dial Type Setting

There are two types of dialing
1
modes: DP [Dial Pulse (Rotary)]
and MF [Multi-Frequency (touch
tone)]. If your telephone emits
tones when you are dialing, this
Display
usually indicates that you have
a MF type line and no adjust-
ment is required. Otherwise, you
will have to select the appropri-
ate setting.
Using
To display the SETUP menu,
press:
press:
+
INITIAL SETUP
1.LANGUAGE
44
2
Display the DIAL
TYPE Menu
Select your dial line type.
INITIAL SETUP
4.DIAL TYPE
(for Multi-Frequency type)
or and
After selecting the dial type, the
or
following will be displayed.
DELETE ACCESS DIGIT
[
DIAL TYPE
Access
1.TONE
which are required by PBX sys-
2.PULSE tems to access the phone sys-
tem "outside" the PBX. A com-
mon access digit is "9."
3
Select Your Dial Enter the Access
Type Digits
PBX Access Digits such as 9,
pause, and 1 need to be omitted
when using chain dialing.
If you will not be using the Chain
Dial feature, press
default
skip this step.
Otherwise, enter the Access
Digits to be deleted (max. 10
(for Dial Pulse type)
digits) using the Dial Keypad.
]
digits are numbers
When the correct Access Digit is
displayed, press:
COMPLETED
Displayed for 2 seconds
Returns to display the SETUP
menu screen.
4
Select Another
SETUP Item, or ...
After completing this Configura-
tion Setting, you may continue
to select other settings referring
to their associated pages for in-
structions, or press
to
to exit the Configuration Setting
mode and return to the Standby
Mode.