Advanced Functions; Multi-Address Transmission (Broadcasting); Group Broadcast Transmission - Toshiba DP80F Operator's Manual

ADVANCED FUNCTIONS - MULTI-ADDRESS TRANSMISSION (BROADCASTING)

Group Broadcast Transmission

The Group Broadcast Transmis-
1
sion feature allows you to send
a document to multiple remote
parties in a single operation.
Load the document face down
Note that a Group Broadcast
in the Document Support (see
Transmission requires all pages
page 82).
to be scanned to memory prior
to dialing, and thus adequate re-
Adjust the resolution and con-
sidual memory is required.
trast if desired (see pages 83
and 84).
NOTE:
If the optional handset is in-
stalled, the handset dialing is
not available.
112
2
Load the Document Select the Group
Location
Press the One Touch Key pro-
grammed for the desired group.
MAY-17 09:43 AM 100% ONE TOUCH =
AUTO RECEIVE COLORADO GRP
SCANNING DOC.
FILE NBR =
Standby Mode screen
Or, display the Group Dial Di-
rectory by pressing:
GROUP NBR =(1-1999)
3
Enter the Group
Number
Enter the Multi-address Trans-
mission Group Number (1 to
1999).
EXAMPLE:
To enter the Group Number
0001, press:
05
After 2 seconds:
(Leading zeros, if any, may
be omitted.)
P001
xxx
NOTE:
When document scan-
ning is completed: When an incorrect number is
entered, use
the preceding digits, or press
from the beginning.
+
GROUP NBR =(1-1999)
[ ]
4
Press the START
Key
When the correct Group Num-
ber is displayed, press:
GROUP NBR =
COLORADO GRP
SCANNING DOC.
FILE NBR =
When document scan-
ning is completed:
to delete
Standby Mode screen
once to start over
[ 1]
0001
P001
xxx