Panasonic KX-NCP0158 Quick Installation Manual page 51

Note
For details about other parameters on this screen, refer to the PC Programming Manual or the On-line
Help for your PBX.
4.
Click Apply.
Note
Please wait about one minute after clicking Apply to allow changes to take effect.
5.
Click Command to return the status of the port to "INS".
De-registering the IP-CS
When uninstalling an IP-CS that has been installed once, de-register the IP-CS.
Note
When uninstalling IP-CSs that are supplying the clock signal, air synchronization is lost. If there is an IP-CS
that is synchronized with the IP-CS that is being uninstalled, reconstruct the air synchronization tree
beforehand so that the uninstalled IP-CS is not supplying the clock signal to any IP-CSs.
1. a.
Under Configuration, click Slot.
b.
For the KX-NCP500/KX-NCP1000, move the
mouse pointer over the PBX image of IPCMPR
Virtual Slot at the top of the screen, and click
Select Shelf. For the KX-TDE100/KX-TDE200/
KX-TDE600, move the mouse pointer over the
white PBX image of IPCMPR Virtual Slot (for the
KX-TDE100/KX-TDE200)/IPCEMPR Virtual Slot
(for the KX-TDE600) at the bottom of the screen,
and click Select Shelf. Move the mouse pointer
over the V-IPCS4 card. A menu will be shown
under the mouse pointer.
c.
Click Port Property.
2. Click De-registration.
A dialog box will appear. Registered IP-CSs are
displayed on the left.
3. a.
Highlight IP-CSs and click the right arrow to select
them for de-registration.
b.
Click Next.
A dialog box will appear.
c.
Click Confirm.
If the de-registration is successful, the dialog box
will show "De-registration succeed!".
d.
Click Close.
Once the IP-CS is successfully de-registered, the status of the IP-CS will update to show "None".
Document Version 2009-12
8 Registering IP Cell Stations
Quick Installation Guide 51