Panasonic KX-NCP0158 Quick Installation Manual page 69

6.
Draw the coverage area on the map.
Level: 03
Step 5 - Ending the Site Survey
1.
Hold down the POWER button on the PS until the PS is off.
2.
Turn off the IP-CS (by disconnecting the IP-CS from an AC adaptor, battery, PoE hub, or PoE adaptor).
3.
Set DIP switch no. 6 (Radio Signal Test switch) from ON to OFF.
Step 6 - Assigning IP Addressing Information to IP-CSs
1.
Prepare the following items:
Power Supply
Switching Hub
LAN cable
PC Maintenance Console
2.
Assign the following IP address and subnet mask address to the PC:
•
IP address: 192.168.2.xxx (xxx: 1–254 except 101)
•
Subnet mask address: 255.255.255.0
3.
Follow the directions indicated on the IP Terminal Maintenance Console.
Document Version 2009-12
S1
S2
Item
AC Adaptor
PoE Hub
PoE Adaptor
IP-CS
A Step-by-step Instructions for Easy Installation
S5
M
S4
S3
Description
KX-A421
IEEE802.3af certified
IEEE802.3af certified
Use a 10BASE-T/100BASE-TX hub.
CAT 5 or higher required.
KX-NCP0158
Latest version
Quick Installation Guide 69