Case 2] One Master Cs; Slave Css Are Synchronizing With The Master Cs And Other Slave Css - Panasonic KX-NCP0158 Quick Installation Manual

A.3 [Case 2] One Master CS; Slave CSs are
Synchronizing with the Master CS and Other Slave
CSs
In addition to the steps described in [Case 1], the following conditions must be met to enable this configuration.
Each Slave CS should be within the coverage area where the radio signal strength levels of other IP-CSs are
as indicated in the chart below.
[Installation Configuration]
Primary CS
Secondary CS
S1
S6
M
S3
S5
[Radio Signal Strength Level Chart for Air Synchronization]
L : The radio signal strength level of A. B should also be within this area.
: B is synchronizing with A by receiving the clock signal from A.
: B is NOT synchronizing with A.
B
M
A
M
S1
S2
S3
S4
S5
S6
Document Version 2009-12
Level: 03
(Radio signal strength level of the Master CS [M])
S4
S2
S1 S2
L: 07-10 L: 07-10
A Step-by-step Instructions for Easy Installation
S3 S4
L: 07-10 L: 03-06
L: 07-10
L: 07-10
S5 S6
L: 03-06 L: 03-06
L: 07-10
L: 07-10
L: 07-10 L: 07-10
Quick Installation Guide 77