Setting Of Software Watchdog; Vmware 5.X Installation Completion; Installation Of Bundled Software; Procedure To Install Vmware 5.X Into Internal Hdd/Ssd - Fujitsu PRIMEQUEST 2000 Series Installation Manual

CHAPTER 4 Installation of Operating System and bundled software

4.8 Procedure to install VMware 5.x into internal HDD/SSD

PRIMEQUEST 2000 series Tool Reference (CA92344-0539).
d. [Commit Changes and Exit] - [Reset System] is specified and the partition is rebooted.
3. After a period of time, the language selection window is displayed.
In case of English, select "English".
4. In initial display window, click [Next] button without setting anything.
5. Select [Deployment] in [Welcome ServerView Installation Manager] window.
6. Select installation mode, select operating system to be installed and set the operating system.
Remark
The IP address of LAN cannot be set in setting operating system. Set IP address after installing the operation system.
7. Click [Start installation].
The installation is started.
8. Replace with the installation medium of operating system according to the instructions of SVIM.

4.7.4 Setting of Software Watchdog.

Watchdog Timer allows reboot OS in case that OS freezes.
For details, see "8.4 Automatic Partition Restart Conditions" of PRIMEQUEST 2000 series Administration Manual
(CA92344-0537).

4.7.5 VMware 5.x Installation completion.

Reboot the partition of the PRIMEQUEST 2000 series when the setting is completed.

4.7.6 Installation of Bundled Software

For details on bundled software, see [D.2 VMware 5.x Bundled Software Installation]
4.8 Procedure to install VMware 5.x into internal HDD/SSD
This section describes the procedure of installing internal HDD/SSD for VMware 5.x.
Start the installation after confirming the MMB configuration and successful to log in to the MMB.

4.8.1 Presetting

Set the following if necessary.
1. Check the partition settings in the MMB after removing internal HDD/SSD of PRIMEQUEST
- Setting of configuration of SB/IOU
See "3.4.1 Setting the partition
- Setting of Console Redirection
See "3.4.6 Settings of Console Redirection"
- Video redirection: Enable
- Virtual media: Enable
- Setting of various modes
See "3.4.5 Various mode
2. [PCI ROM Priority] of BIOS is set.
- For the UEFI Install
- Set [Device Manager]-[PCI Subsystem Configuration]-[PCI ROM Priority] of BIOS menu to "EFI Compatible
Rebooting OS is executed when the set time passes,
configuration"
settings"
78
CA92344-0536-01