Settings Of Console Redirection; Figure 3.27 Example Of [Ipv4 Console Redirection Setup] Window - Fujitsu PRIMEQUEST 2000 Series Installation Manual

CHAPTER 3 Work before Operating System Installation
3.4 Partition Configuration (Physical Partition)

3.4.6 Settings of Console Redirection

When operating system is installed remotely, it is necessary to set Console Redirection. Set the Console Redirection to the
subnet same as management LAN.
[IPv4 Console Redirection Setup] window
1. Click [Partition] - [Console Redirection Setup] - [IPv4 Console Redirection Setup] window.
 [IPv4 Console Redirection Setup] window is displayed. For details on window, see "1.3.3 [Console Redirection
Setup] window" of PRIMEQUEST 2000 series Tool Reference (CA92344-0539).
FIGURE 3.27
2. Set IP address and subnet mask to access Console Redirection LAN for IPv4
3. Enable video redirection and virtual media respectively.
4. Click [Apply] button.
Note
After installation, disable the functions not used.
Example of [IPv4 Console Redirection Setup] Window
44
CA92344-0536-01