Set Up Of Smtp; Set Up Of Security; Set Up Of Access Control - Fujitsu PRIMEQUEST 2000 Series Installation Manual

CHAPTER 6 Work after installation

6.4 Set up of SMTP

6.4 Set up of SMTP
See "3.3.9 Set up of Alarm
6.5

Set up of security

This section describes how to make the necessary settings to ensure security and notification of errors during operation.
Configure the security necessary for operation.
It is recommended to take the back-up of the set-up information when below mentioned set ups are completed. See "3.5
Save structural information" for the back-up of the set information.
- 6.5.1 Set up of a access control
- 6.5.2 Set up of SNMP
- 6.5.3 Set up of SSH
- 6.5.4 Set up of HTTPS
All the screenshots are display examples and the contents to be displayed differ depending upon the system configuration.

6.5.1 Set up of Access Control

To secure the security of MMB, set up access control according to Network Protocol.
For securing the security, it is recommended to set up access control at the time of installation. Access control can also be
set up after the installation.
Selection of Filters of Editing objects
Operations
1. Click [Network Configuration] - [Access Control].
→ [Access Control] window is displayed. See "1.5.10 [Access Control] window" of PRIMEQUEST 2000 series Tool
Reference (CA92344-0539) for the details of [Access Control] window.
E-Mail" for configuration of SMTP.
113
CA92344-0536-01