Various Mode Settings; Figure 3.26 Example Of [Partition Configuration] Window - Fujitsu PRIMEQUEST 2000 Series Installation Manual

CHAPTER 3 Work before Operating System Installation
3.4 Partition Configuration (Physical Partition)
2. Select partition which sets the partition name and enter the partition name in [Partition name] cell.
Remark
The name can be input up to 16 characters. The characters that can be used are as follows.
[0-9], [a-z], [A-Z], half-width space, # (Sharp), _ (Underline), and – (Hyphen)
3. Click [Set Partition Name] button.
 Name is set for the selected partition.

3.4.5 Various mode settings

Dynamic Reconfiguration, Memory operation mode, and Hyper Threading Mode, etc. of the partition are set. Setting items
are set by MMB Web-UI and UEFI. Following table lists the setting items and screen transition.
For details on the respective settings, see PRIMEQUEST 2000 series Tool Reference (CA92344-0539)
Example of [Partition Configuration] Window
FIGURE 3.26
41
CA92344-0536-01